View Full-Size Image
$139.00 (includes GST) Free Shipping NZ Wide
Boxed unit includes:
S7070r receiver, remote, manual and AV leads
The Freeview approved DishTV satBox S7070r digital satellite receiver provides crystal clear pictures, an easy to use remote control and full MHEG-5 Freeview EPG.
The satBox provides component, A/V and RF outputs for use in either domestic or commercial installations and easy tuning via full blind scan channel search, including auto LNB search. With MHEG-5 channel updates, new channels are added automatically.
Simply because the Freeview satellite broadcast is in standard definition and current HDTVs with HDMI inputs have very good video up-scale chipsets built-in.
The best way to benefit from your TV’s built-in up-scaling chipset is to feed it digital audio and video via an HDMI port and let your HDTV upscale the crystal clear digital picture to fit it’s screen.
Please note this is a satellite receiver only and it requires a satellite dish.
Sales brochure has more info
User Manual Version 4 (2.8mb) Revision 2012-07-25
With the Prime channel moving to being transmitted by Sky, the S7070r needs to rescan to locate the new transmission.
The steps to do this are as follows
The receiver will then scan through and locate the Prime transmission. This process will take approximately 10-15 minutes to complete. Once the scan process is completed press Exit to return.
Latest firmware installer for windows (Download Here) v1.2f Released 20 September 2014 (NOTE: Once downloaded Run the download on your windows computer with your USB flash drive inserted, Instructions of how to load the firmware onto your S7070r will appear after your USB drive is setup. Please follow the instructions provided with this installer not the instructions in your user manual.)
Latest firmware Compressed ZIP file v1.2f Released 20 September 2014 Firmware updating instructions are included with the download.
Click Here to download the Firmware Change log PDF
We recommend that all USB hard drives be externally powered rather than relying on the USB port of the satBox to power the hard drive.
For PVR Functionality the USB hard drive will need to be formatted as FAT32. Most new external drives come pre-formatted as NTFS so will need to be reformatted as FAT32.
Formatting will wipe any files that are currently on the Drive so you should copy anything you want to keep off the drive before formatting.
Windows will not allow you for format any drive larger than 32GB as FAT32 so you will need to use a third party formatting utility such as Fat32Formatter to format the drive.
Model Number: S7070r
Width: 260, Height: 50, Length: 175
Unit of Measure: mm
For free technical assistance on our brands:
Call 0800 DISH TV (0800 347 488)
or 07 929 4123
Mon-Fri, 9am - 5pm
Choose Technical Support at the menu