to configure your T1050PVR/S7090PVR to use PH2 remote
1. Ensure the latest software is installed on the Freeview receiver. The latest software is downloadable from here: http://www.dishtv.co.nz/downloads or you would have been sent the software on a USB drive if requested.
For instructions on how to update software please locate your model here: https://www.dishtv.co.nz/FAQ
2. Once the software is installed you will need to ensure batteries are inserted in the remote.
3. If you press a button on the remote you will get this message."Hold down Zero key for 15secs to enable this remote."
4. After holding the Zero button on the remote for this set time you will see a message on screen " Remote configured successfully "
Be sure to keep remote pointed at the unit while doing this.
5. Remote should now work fine.
Remote control for SatBox or AerialBox