Your shopping cart is empty!
Remote for satBox/aerialBox
Availability: In Stock
Remote for satBox/aerialBox
Product Code: REMPH2
$35.00
Ex GST: $30.43
Ex GST: $30.43
How
to configure your T1050PVR/S7090PVR to use PH2 remote
1. Ensure the latest software is installed on the Freeview receiver. The latest software is downloadable from here: http://www.dishtv.co.nz/downloads or you would have been sent the software on a USB drive if requested.
For instructions on how to update software please locate your model here: https://www.dishtv.co.nz/FAQ
2. Once the software is installed you will need to ensure batteries are inserted in the remote.
3. If you press a button on the remote you will get this message."Hold down Zero key for 15secs to enable this remote."
4. After holding the Zero button on the remote for this set time you will see a message on screen " Remote configured successfully "
Be sure to keep remote pointed at the unit while doing this.
5. Remote should now work fine.
Remote control for SatBox or AerialBox
Supporting Models:
T1050S7090PVR
T1000n-VM
S7070RHD
S7070RHD
S8100
S8200
T2200
T2100**
To use this remote, some units will require its latest software*, please ensure your unit is up to date.
Software downloads available here: http://www.dishtv.co.nz/downloads or on the product page for the respective product.
If your unit is not listed in the description above it is not supported by this remote.
*If you are unsure how to update or don't have access to a USB drive please select your model number from the drop down list, USB drive and instructions will be sent with the remote.
**The software update for the T2100 unit requires a working remote or a connection to the internet. If you have neither, the unit can be sent to Dish TV where the latest software will be uploaded for you. Alternatively, you can order the REMPH1 which will work without the software update.
Powered By OpenCart
Dish TV Technologies © 2018